30 Years Of Professional Production Experience In IV Sets In China
Vented IV Set& Non-vented IV Set
As a manufacturer, we have 30 years of professional production experience in China. The way to distinguish these two IV sets is by observing the air vent on the spike. From the pictures, you’ll see the differences.
Vented IV sets have a small blue air vent on the spike. Medical personnel can open and close it to allow air to enter and displace the fluid upon leaving the container. The Vented IV set is usually used with hard plastic or glass containers.
Non-vented IV sets do not have an air vent that allows opening and closing. Flexible plastic containers need this type of IV set.
Vented IV Set
Vented IV set, Y-site, Latex-free, DEHP-free
ABS spike with air vent, small DEHP-free PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex-free Y injection site, ABS clamp, ABS Luer lock connector, PE cap, 150cm DEHP-free PVC tubing.
Available options
- Small or medium drip chamber
- PE or ABS roller clamp
- With or without clamp
- Length is optional
- PVC or DEHP-free PVC
IV set vented, Y-site, Latex-free, Luer lock
ABS spike with air vent, small PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex-free Y injection site, ABS Luer lock connector, 21G (0.8*38mm) needle, 150cm PVC tubing.
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- With or without needle
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
IV set vented, Y-site, Latex-free, Luer slip
ABS spike with air vent, small PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex-free Y injection site, ABS Luer slip connector, 21G (0.8*38mm) needle,150cm PVC tubing.
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- With or without needle
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Vented IV set, Y-site, Latex-free, With clamp, 20 drops/ml
ABS spike with air vent, small PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex-free Y injection site, ABS clamp, ABS Luer lock connector, PE cap, 150cm PVC tubing.
Available options
- Small or medium drip chamber
- PE or ABS roller clamp
- With or without clamp
- Length is optional
- PVC or DEHP-free PVC
Vented IV set, Y-site, Latex-free, With clamp, 60 drops/ml
ABS spike with air vent, small PVC drip chamber with solution filter, 60 drops/ml, PE roller clamp, Latex-free Y injection site, ABS clamp, ABS Luer lock connector, PE cap, 150cm PVC tubing.
Available options
- Small or medium drip chamber
- PE or ABS roller clamp
- With or without clamp
- Length is optional
- PVC or DEHP-free PVC
IV Set,Vented Spike, 20 drops/ml, Luer lock conector
ABS spike with air vent, small PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex rubber injection, ABS Luer lock connector, PE cap, 150cm PVC tubing
Available options
- Small or medium drip chamber
- With or without air vent
- With or without needle
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Vented IV Set, Luer lock connector with needle 21G (0.8*38mm)
ABS spike with air vent, small PVC drip chamber with solution filter, 20 drops/ml, PE roller clamp, Latex rubber injection, ABS Luer lock connector, 21G (0.8*38m) needle, 15ocm PVC tubing
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- With or without needle
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
IV set, Vented, with 22G needle (0.7*38mm)
ABS spike with air vent, small PVC drip chamber with solution filter, PE roller clamp, Latex rubber injection, ABS Luer slip connector, 22G (0.7*38m) needle, 15ocm PVC tubing
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- With or without needle
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Vented IV set, Luer slip connector
ABS spike with air vent, small PVC drip chamber with solution filter, PE roller clamp, Latex rubber injection, ABS Luer slip connector, 21G (0.8*38m) needle, 15ocm PVC tubing
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- Latex or Latex-free
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Vented IV set, DEHP-free, Latex-free, Luer lock connector
ABS spike with air vent, small PVC drip chamber with solution filter, PE roller clamp, Latex-free rubber injection, ABS Luer lock connector, 21G (0.8*38m) needle, 15ocm DEHP-free PVC tubing
Available options
- Small or medium drip chamber
- Luer lock or luer slip
- Latex or Latex-free
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Non Vented IV Set
Non-vented IV set, Luer slip connector
ABS spike without air vent, small PVC drip chamber with solution filter, PE roller clamp, ABS Luer slip connector, PE cap, 150 PVC tubing.
Available options
Non-vented IV set with 21G needle (0.8*38mm)
ABS spike without air vent, small PVC drip chamber without solution filter, PE roller clamp, Latex rubber injection, ABS Luer slip connector, 21G (0.8*38m) needle, 15ocm PVC tubing
Available options
- Small or medium drip chamber
- PE or ABS roller clamp
- Length is optional
- PVC or DEHP-free PVC
Primary packing: IV set in a paper pouch & IV set in a small PE bag
Secondary packing: big PE bag& normal box .
Outer carton
| Current parts | Replace by |
| Drip chamber | Small drip chamber, medium drip chamber or winged drip chamber |
| Air vent | To be removed. This kind of IV set is called a non-vented IV set. To be retained. This kind of IV set is called a vented IV set |
| Solution filter | To be removed or retained. |
| Roller clamp | ABS roller clamp, which is with more appropriate mechanical properties, such as impact resistance, toughness, and rigidity, compared with other common polymers. PE roller clamp, from the perspective of reducing the cost, we can make roller clamps of PE (polyethylene), which is now the most common use plastic. |
| Rubber bulb | Latex-free rubber bulb, which is for people who are allergic to natural rubber. Latex rubebr bulb Straight latex-free injection tube |
| Luer connector | Luer lock connector, which makes a more stable connection with the hypodermic needle. Luer slip connector is easier to be removed. |
| Tubing | PVC or DEHP-FREE PVC, which is used to make the tubing, which is used to infuse some particular drugs. |
| Length | normal length is 150cm. Be customized to 180cm or longer |
ABOUT KMED
Liaoning Kangyi Medical Equipment Co., Ltd. (Kmed) was founded in 1994. It has been one of the leading disposable infusion sets and syringes manufacturers within the healthcare industry in Liaoning. We have more than 300 staff working in the company, which occupies an area of 20,000 square meters, with a construction area of 15,000 square meters. This space includes a 100,000-class purification workshop that occupies 8,000 square meters.
Frequently Asked Question
We’re a manufacturer with 30 years production experience in China. Our products are qualified with CE and ISO certificates.
The regular lead time is 45-50 days. It is affected by the purchase of raw materials& parts, packing production, etc.
Italy, Turkey, Uzbekistan, Kyrgyzstan, Turkmenistan, Korea, Brazil, Pakistan, Vietnam, etc.
CE, ISO, FSC, Medical device registration certificate, etc.
The prices fluctuate and are mainly affected by raw materials cost, labor cost, exchange rate, etc.
Still have questions? Click here to browse our FAQ page or contact support.
